Epever Solar Charge Controller MPPT 40A 30A 20A Blacklight LCD Solar Regulator 12V 24V Auto Tracer1210an 2210an 3210an 4210an

Overview:

The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Improving the MPPT control algorithm further, Tracer AN series can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any conditions; and can increase the ratio of energy utilization in the solar system by 10%-30% compared with a PWM charging method. The limitation function of the charging power and current and reducingcharging power function automatic improve the stability which works even connecting oversize PV modules and in high temperature, and increase the professional protection chip for the communication port, further improving the reliability and meeting the different application requirements.

Features:

• Advanced MPPT technology, with efficiency no less than 99.5%\Ultra-fast tracking speed and guaranteed tracking efficiency

• Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time

• Wide MPP operating voltage range

• High quality components, perfecting system performance, with maximum conversion efficiency of 98%

• Accurate recognition and tracking of multiple-peaks maximum power point

• International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product's service life

• Charging power and current limitation function

• Compatible with lead-acid and lithium-ion batteries

• Battery temperature compensation function

• Real-time energy statistics function

• Overheating power reduction function

• Multiple load work modes

• The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.

• With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

• Monitor and set the parameters via mobile phone APP or PC software

• Full-load operation without any drop in capacity within the range of working environment temperature

• Extensive electronic protection
  

  Technical Specifications:

  Item	Tracer 1206AN	Tracer 2206AN	Tracer 1210AN	Tracer 2210AN	Tracer 3210AN	Tracer 4210AN
  System nominal voltage	12V/24VDC Auto
  Rated charge current	10A	20A	10A	20A	30A	40A
  Rated discharge current	10A	20A	10A	20A	30A	40A
  Battery voltage range	8~32V
  Max. PV open circuit voltage	46V		92V
  MPP voltage range	(Battery voltage +2V)~36V		(Battery voltage +2V)~72V
  Max. PV input power	130W/12V 260W/24V	260W/12V 520W/24V	130W/12V 260W/24V	260W/12V 520W/24V	390W/12V 780W/24V	520W/12V 1040W/24V
  Self-consumption	<=12mA
  Discharge circuit voltage drop	<=0.23V
  Temperature compensate coefficient	-3mV/°C/2V (Default)
  Grounding	Common negative
  RS485 interface	5VDC/100mA
  LCD backlight time	60S (Default)
  Environmental Parameters
  Working environment temperature	-25°C~+50°C(100% input and output)
  Storage temperature range	-20°C~+70°C
  Relative humidity	<=95%, N.C.
  Enclosure	IP30
  Dimension	172x139 x 44mm	220x154x 52mm	172x139 x 44mm	220x154x 52mm	228x164x55mm	252x180x63mm
  Mounting dimension	130x130mm	170x145mm	130x130mm	170x145mm	170x164mm	210x171mm
  Terminal	12AWG(4mm 2 )	6AWG(16mm 2 )	12AWG(4mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2
  Recommended cable	12AWG(4mm 2 )	10AWG(6mm 2 )	12AWG(4mm 2 )	10AWG(6mm 2 )	8AWG(10mm 2 )	6AWG(16mm 2 )
  Weight	0.57kg	0.94kg	0.57kg	0.94kg	1.26kg	1.65kg